RePoxy P18 is a ultra-low viscosity injectable 2 component epoxy resin designed for crack injection and structural consolidation

Repoxy P18 conforms to ASTM C881 Type 1 & 4 Grade 1 ClassB&C

Features

• Ultra-low viscosity (<lSOmPa) suitable for fine crack/joint sealing.
• Travels longer distance during pressure injection.
• High pot-life (>30minutes)
• Solvent free.
• Very High strength (>70MPa)
• Cured resin is resistance to wide range of acids, alkalis, inorganic and organic compounds.

Area of Application

• Sealing of Cracks in concrete up to 0.2mm-10mm
• Consolidation of concrete structures
• The grouting of machine and bearing base plate where the gap is less than 5mm.

Method of Application

• Mix Resin and hardener as per mixing ratio.
• Inject mixed epoxy with grouting pre-fixed nipples.
• Inject till the material oozed out from adjacent nipple(s).
• Use it within 20 minutes of mixing.
  Grouting can also be done by simply pouring from one side specially for gap filling of machine or bearing bridge bearing plates with a gap of less than10mm.

Coverage

Depending on site conditions. Density:
1to l.12kg/l

Packing

5kg