UltraGrout 90 is a single component packaged dry, hydraulic cement Grout (Non-Shrink), free flowing ready to use cementitious grout.

Features

• High early and ultimate compressive strength (70MPa)
• Free from chloride
• High bond strength
• Pumpable for easy placement
• Can be made as flowable or as a plastic mix depending on the application requirements.
• Non-Shrink Grout fills up voids completely.
• No compaction needed

Area of Application

• Grouting of:
• Machine base plates
• Bridge bearing,
• Steel/concrete Column foundation
• Joint filling of precast housing
• Groove filling /Gap filling in construction joints of building

Method of Application

UltraGrout 70 must be mixed by mechanical mortar mixers of slow speed (250- 350 rpm) paddle mixer or revolving drum type mixer but if a large quantity is needed then it is easier to use a mixing vessel.

• For Flowable Mix: W/P Ratio: 0.11to 0.14
• For Plastic Mix: W /P Ratio: 0.10 to 0.13
• For Dry-pack Mix: W /P Ratio: 0.09 to 0.12

Yield / Coverage

1900-2200 kg powder is required forlm3volume.

Packing

25kg