PAMR UltraGrout 70 is a single component packaged dry, hydraulic cement Grout (Non-Shrink), free flowing ready to use cementitious grout.

Features

• High early and ultimate compressive strength (70MPa)
• Free from chloride
• High bond strength
• Pumpable for easy placement
• Can be made as flowable or as a plastic mix depending on the application requirements.
• Non-Shrink Grout fills up voids completely.
• No compaction needed.

Area of Application

• Grouting of:
• Machine base plates
• Bridge bearing,
• Steel Iconcrete Column foundation
• Joint filling of precast housing
• Groove filling /Gap filling in construction joints of building

Method of Application

• UltraGrout 70 must be mixed by mechanical mortar mixers of slow speed (250- 350 rpm) paddle mixer or revolving drum type mixer but if a large quantity is needed then it is easier to use a mixing vessel.
• For Flowable Mix: W/P Ratio: 0.15 to 0.19
• For Plastic Mix: W/P Ratio: 0.14 to 0.16
• For Dry-pack Mix: W/P Ratio: 0.12 to 0.15

Yield / Coverage

1800-1900 kg powder is required for lm3 volume.

Packing

25kg